Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TC1029EOA

TC1029EOA

TC1029EOA

Microchip Technology

4mA per Channel 50pA 70 dB Instrumentational OP Amps 0.0001μA 5V 1.8V~5.5V ±0.9V~2.75V TC1029 8 Pins 8-SOIC (0.154, 3.90mm Width)

SOT-23

TC1029EOA Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2002
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Reach Compliance Code unknown
[email protected] Reflow Temperature-Max (s) 40
Base Part Number TC1029
Pin Count 8
Qualification Status Not Qualified
Output Type Rail-to-Rail
Operating Supply Voltage 5V
Number of Elements 2
Operating Supply Current 12μA
Nominal Supply Current 12μA
Slew Rate 0.035V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 70 dB
Current - Input Bias 50pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±0.9V~2.75V
Output Current per Channel 4mA
Input Offset Voltage (Vos) 500μV
Gain Bandwidth Product 90kHz
Unity Gain BW-Nom 90 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.0001μA
Power Supply Rejection Ratio (PSRR) 80dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 100μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.0001μA
Height Seated (Max) 1.75mm
Length 4.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
TC1029EOA Product Details

TC1029EOA Overview


Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAn 12μA volt supply current is needed for this linear amplifier to operate. 100dB should remain the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis.

TC1029EOA Features


8 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail

TC1029EOA Applications


There are a lot of Microchip Technology TC1029EOA Instrumentational OP Amps applications.

  • Automotive sensors
  • Radar
  • Fission chambers
  • Video amplifiers
  • Addition operation circuits
  • Medical instruments
  • Signal filtering
  • Cinema or auditorium audio system
  • Thermocouples
  • PDA

Related Part Number

TL074IDG4
TL074IDG4
$0 $/piece
TLV271CDBVTG4
TL074IDE4
TL074IDE4
$0 $/piece
THS3121CDGN
TLC272BCPG4
LM8272MMX
LM8272MMX
$0 $/piece
LPV324IPWRE4
TLV2465AIPWRG4
MAX4251EUA
MAX4251EUA
$0 $/piece

Get Subscriber

Enter Your Email Address, Get the Latest News