TC54VN2902EZB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Bulk. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Power management conducts at a voltage of 1. The mount is attached to Through Hole. 3 pins are on the supervisor. It is recommended that Vsup should not be less than 700mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3.6μA. You can always use TC54VN2902, the base supervisor number, to search for similar PMICs of the manufacturer.

TC54VN2902EZB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

TC54VN2902EZB Applications

There are a lot of Microchip Technology TC54VN2902EZB Voltage Supervisors applications.

• Battery cars
• Detection of phase sequence
• Data storage applications
• Fire equipment power monitoring system
• Medical-specific insulation monitor
• Battery cars
• Power distribution systems of operating room
• Computer applications
• Important electronics for automotive safety
• Precision measurement