TCM811MERCTR Overview

Power management is mounted through 4 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-253-4, TO-253AA functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 4 pins on power management. This power management system has 4 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 6μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using TCM811M, the base power ics number. This power management requires 5V power to work.

TCM811MERCTR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
6μA operating supply current

TCM811MERCTR Applications

There are a lot of Microchip Technology TCM811MERCTR Voltage Supervisors applications.

• WiFi router
• Power distribution systems of ICU
• Smartphones
• Automotive permanent magnet synchronous motors
• Refrigeration
• Battery cars
• Electronics installed in the vehicle
• Linux and server computing
• Military electronics
• Digitally controlled LDO regulators circuit