M29W010B70K6E Overview

As far as its memory type goes, it falls into the Non-Volatile category. You can get memory ics in a Tube case. The case is embedded in 32-LCC (J-Lead). This chip has an 1Mb 128K x 8 size of memory on it, so a lot of data can be stored on it. This device uses a FLASH-format memory, which is of mainstream design. A wide operating temperature range makes this device ideal for a variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V. The recommended mounting type for memory ics is Surface Mount. To select similar parts, many people use the device's base part number M29W010. A 32-pin package containing this memory device is used to house this device. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. As far as the nominal supply current of this memory component is concerned, it is rated at 10mA. Temperatures below -40°C should not be used with this memory ics. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order for this part to work properly, there must be a minimum voltage supply of 2.7V volts. The operating voltage of the memory ics shall not exceed 3.6V.

M29W010B70K6E Features

Package / Case: 32-LCC (J-Lead)
32 Pins

M29W010B70K6E Applications

There are a lot of Micron Technology Inc. M29W010B70K6E Memory applications.

• DVD disk buffer
• eDRAM
• networks
• workstations,
• data buffer
• embedded logic
• hard disk drive (HDD)
• servers
• nonvolatile BIOS memory
• Cache memory