MPQ3386DR-LF-P Overview

There is a 24-VFQFN Exposed Pad package on the board that is used to save space. LED drivers have a total of 6 outputs that are used in the design of the drivers.We are using Surface Mount as the mounting method.It emergys as a DC DC Regulator with high efficiency and reliable performance.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.Automotive, Backlight has many benefits.It operates based on the frequency of 1.25MHz.There are 24 pins on the base of this LED driver.A voltage supply less than 4.5V will cause undetermined failures.There is a mounting of it by Surface Mount.50V is the output voltage.In this case, the maximum value will be 25V.When the input voltage is set to 4.5V, it operates.Currently, the supply current can only reach 25V.Temperatures should not exceed 125°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.When the switching frequency is maintained at 1.25MHz, this electronic component is able to fully play its functions.Several applications make use of this LED driver from the Automotive, AEC-Q100 series.If the output voltage exceeds 50V, it should be corrected.Transmissions are currently available on 6 channels.There is an output type of Frequency on this device.

MPQ3386DR-LF-P Features

Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1.25MHz
Switching frequency of 1.25MHz

MPQ3386DR-LF-P Applications

There are a lot of Monolithic Power Systems Inc. MPQ3386DR-LF-P LED Driver ICs applications.

• LED backlight driver for LCD displays for portable equipment
• Dimmable LED for vehicle interiors
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Constant Voltage Power Source for portable equipment
• Museum lighting
• White LED Backlight for portable equipment
• High-end retail lighting
• Medical surgery lighting
• LED Lighting PFCs, Linear Dimmable
• Replacement lamps