74AHC574D,118 Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~5.5Vis required for its operation. It is at -40°C~125°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74AHC series. It should not exceed 115MHzin terms of its output frequency. In total, there are 1 elements. As a result, it consumes 4μA quiescent current. 20terminations have occurred. Members of the 74AHC574family make up this object. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of AHC/VHC/H/U/V. As you can see from the design, it has pins with 20. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 2V for normal operation. This flip flop has a total of 2ports. Its output current of 25mAallows for maximum design flexibility. Furthermore, it has BROADSIDE VERSION OF 374as a characteristic.

74AHC574D,118 Features

Tape & Reel (TR) package
74AHC series
20 pins

74AHC574D,118 Applications

There are a lot of Nexperia USA Inc. 74AHC574D,118 Flip Flops applications.

• ATE
• Pattern generators
• Bounce elimination switch
• Load Control
• Divide a clock signal by 2 or 4
• Asynchronous counter
• Computing
• Registers
• Storage registers
• Guaranteed simultaneous switching noise level