74AHCT574D,112 Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. It should not exceed 115MHzin terms of its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. The 74AHCT574 family contains this object. Power is provided by a 5V supply. Its input capacitance is 3pF farads. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. It is mounted by the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There are 8bits in its design. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. A total of 8input lines have been provided. It is also characterized by BROADSIDE VERSION OF 374.

74AHCT574D,112 Features

Tube package
74AHCT series
20 pins
8 Bits

74AHCT574D,112 Applications

There are a lot of Nexperia USA Inc. 74AHCT574D,112 Flip Flops applications.

• Event Detectors
• Functionally equivalent to the MC10/100EL29
• ESD performance
• Data transfer
• Asynchronous counter
• Instrumentation
• Frequency Dividers
• Storage Registers
• Load Control
• Clock pulse