74ALVC374PW,118 Overview

The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tape & Reel (TR)package contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~3.6V. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ALVCseries contain this type of chip. Its output frequency should not exceed 300MHz. The element count is 1 . There is a consumption of 10μAof quiescent energy. It has been determined that there have been 20 terminations. The 74ALVC374 family contains it. The power supply voltage is 2.7V. Its input capacitance is 3.5pFfarads. Electronic devices of this type belong to the ALVC/VCX/Afamily. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. An electronic part designed with 8bits is used in this application. In this case, the maximum supply voltage (Vsup) reaches 3.6V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Featuring the maximum design flexibility, it has an output current of 50mA . This input has 8lines.

74ALVC374PW,118 Features

Tape & Reel (TR) package
74ALVC series
20 pins
8 Bits

74ALVC374PW,118 Applications

There are a lot of Nexperia USA Inc. 74ALVC374PW,118 Flip Flops applications.

• Consumer
• Parallel data storage
• Divide a clock signal by 2 or 4
• Modulo – n – counter
• Event Detectors
• Shift registers
• Balanced Propagation Delays
• Data storage
• Differential Individual
• Pattern generators