74ALVC574PW,118 Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. Tri-State, Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 1.65V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ALVCseries contain this type of chip. A frequency of 300MHzshould be the maximum output frequency. D latch consists of 1 elements. Despite external influences, it consumes 10μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74ALVC574. A voltage of 2.7V provides power to the D latch. A JK flip flop with a 3.5pFfarad input capacitance is used here. ALVC/VCX/Ais the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. Flip flops designed with 8bits are used in this part. As soon as Vsup reaches 3.6V, the maximum supply voltage is reached. The flip flop contains 2ports. This input has 8lines.

74ALVC574PW,118 Features

Tape & Reel (TR) package
74ALVC series
20 pins
8 Bits

74ALVC574PW,118 Applications

There are a lot of Nexperia USA Inc. 74ALVC574PW,118 Flip Flops applications.

• Pattern generators
• Matched Rise and Fall
• Count Modes
• Divide a clock signal by 2 or 4
• Automotive
• Bus hold
• ESD protection
• Reduced system switching noise
• Cold spare funcion
• Common Clocks