74AUP1G79GM,115 Overview

The package is in the form of 6-XFDFN. There is an embedded version in the package Tape & Reel (TR). It is configured with Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A 0.8V~3.6Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis used in the operation. D-Typedescribes this flip flop. The FPGA belongs to the 74AUP series. A frequency of 309MHzshould not be exceeded by its output. A total of 6 terminations have been made. If you search by 74AUP1G79, you will find similar parts. The power source is powered by 1.1V. This JK flip flop has a 0.8pFfarad input capacitance. Devices in the AUP/ULP/Vfamily are electronic devices. Surface Mount mounts this electronic component. There are 6pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. An electronic part with 1bits has been designed. Keeping the supply voltage (Vsup) above 0.8V is necessary for normal operation. The superior flexibility is achieved through the use of 1 circuits. As a result, it consumes 500nA of quiescent current without being affected by external factors.

74AUP1G79GM,115 Features

Tape & Reel (TR) package
74AUP series
6 pins
1 Bits

74AUP1G79GM,115 Applications

There are a lot of Nexperia USA Inc. 74AUP1G79GM,115 Flip Flops applications.

• Balanced 24 mA output drivers
• Divide a clock signal by 2 or 4
• Power down protection
• Frequency division
• Circuit Design
• Memory
• Convert a momentary switch to a toggle switch
• Individual Asynchronous Resets
• Storage registers
• Digital electronics systems