74LCX374MSAX Overview

The package is in the form of 20-SSOP (0.209, 5.30mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LCXseries contain this type of chip. Its output frequency should not exceed 150MHz Hz. A total of 1elements are present in it. It consumes 10μA of quiescent There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74LCX374 family contains it. A voltage of 2.5V is used as the power supply for this D latch. A 7pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of LVC/LCX/Z. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The design is based on 8bits. For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 8 circuits. A total of 2ports are embedded in the D flip flop. In order to operate, the chip has 3 output lines.

74LCX374MSAX Features

Tape & Reel (TR) package
74LCX series
20 pins
8 Bits

74LCX374MSAX Applications

There are a lot of ON Semiconductor 74LCX374MSAX Flip Flops applications.

• Power down protection
• Asynchronous counter
• Cold spare funcion
• Registers
• Common Clocks
• Counters
• EMI reduction circuitry
• CMOS Process
• Frequency division
• Functionally equivalent to the MC10/100EL29