74HC107DB,112 Overview

It is embeded in 14-SSOP (0.209, 5.30mm Width) case. The package Tubecontains it. As configured, the output uses Differential. There is a trigger configured with Negative Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. -40°C~125°C TAis the operating temperature. It belongs to the type JK Typeof flip flops. It is a type of FPGA belonging to the 74HC series. A frequency of 85MHzshould not be exceeded by its output. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HC107 family. A voltage of 5V is used to power it. A 3.5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HC/UH. It is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device's clock edge trigger type is Negative Edge. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 2 circuits. For high efficiency, the supply voltage should be set to 5V. Quiescent current is consumed by the D latch in the amount of 4μA.

74HC107DB,112 Features

Tube package
74HC series
14 pins

74HC107DB,112 Applications

There are a lot of Nexperia USA Inc. 74HC107DB,112 Flip Flops applications.

• Common Clocks
• Reduced system switching noise
• Convert a momentary switch to a toggle switch
• Communications
• Power down protection
• Data Synchronizers
• Matched Rise and Fall
• Computers
• Latch
• Asynchronous counter