74ACTQ74SCX Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Differential. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74ACTQ series. There should be no greater frequency than 200MHzon its output. As a result, it consumes 20μA quiescent current and is not affected by external forces. It is a member of the 74ACTQ74 family. Its input capacitance is 4.5pF farads. Surface Mount mounts this electronic component. 14pins are included in its design. This device has the clock edge trigger type of Positive Edge. Despite its superior flexibility, it relies on 2 circuits to achieve it. The supply voltage should be maintained at 5V for high efficiency. There are 1 output lines in this JK flip flop.

74ACTQ74SCX Features

Tape & Reel (TR) package
74ACTQ series
14 pins

74ACTQ74SCX Applications

There are a lot of ON Semiconductor 74ACTQ74SCX Flip Flops applications.

• Registers
• Dynamic threshold performance
• Instrumentation
• Balanced Propagation Delays
• Buffered Clock
• Balanced 24 mA output drivers
• CMOS Process
• Frequency Dividers
• Guaranteed simultaneous switching noise level
• Latch