74HC112PW,112 Overview

It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. D flip flop is embedded in the Tube package. This output is configured with Differential. In the configuration of the trigger, Negative Edgeis used. Surface Mountis in the way of this electric part. With a supply voltage of 2V~6V volts, it operates. A temperature of -40°C~125°C TAis considered to be the operating temperature. There is JK Type type of electronic flip flop associated with this device. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 71MHz. There have been 16 terminations. The 74HC112family includes it. It is powered from a supply voltage of 4.5V. Its input capacitance is 3.5pFfarads. An electronic device belonging to the family HC/UHcan be found here. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 16. In this device, the clock edge trigger type is Negative Edge. There is a 6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. To achieve this superior flexibility, 2 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. In terms of quiescent current, it consumes 4μA .

74HC112PW,112 Features

Tube package
74HC series
16 pins

74HC112PW,112 Applications

There are a lot of Nexperia USA Inc. 74HC112PW,112 Flip Flops applications.

• Buffered Clock
• Counters
• CMOS Process
• Frequency division
• Data transfer
• Modulo – n – counter
• Storage Registers
• Control circuits
• Shift registers
• Matched Rise and Fall