SN74ACT564DWR Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. It is contained within the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74ACTseries contain this type of chip. You should not exceed 90MHzin the output frequency of the device. D latch consists of 1 elements. Despite external influences, it consumes 4μAof quiescent current. The number of terminations is 20. Members of the 74ACT564family make up this object. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. ACTis the family of this D flip flop. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. The part is included in Bus Driver/Transceiver. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 3lines.

SN74ACT564DWR Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT564DWR Applications

There are a lot of Texas Instruments SN74ACT564DWR Flip Flops applications.

• Counters
• Frequency Dividers
• High Performance Logic for test systems
• Buffered Clock
• ESD performance
• Synchronous counter
• Common Clocks
• Storage Registers
• Differential Individual
• Divide a clock signal by 2 or 4