74HC377DB-Q100J Overview

The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 83MHz. The element count is 1 . If you search by 74HC377, you will find similar parts. A 3.5pFfarad input capacitance is provided by this T flip flop. It is mounted by the way of Surface Mount. This board has 20 pins. The clock edge trigger type for this device is Positive Edge. Optimal efficiency requires a supply voltage of 5V. As of now, there are 8input lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.

74HC377DB-Q100J Features

Tape & Reel (TR) package
74HC series
20 pins

74HC377DB-Q100J Applications

There are a lot of Nexperia USA Inc. 74HC377DB-Q100J Flip Flops applications.

• Automotive
• Bounce elimination switch
• Convert a momentary switch to a toggle switch
• Single Down Count-Control Line
• ESD performance
• Frequency division
• Communications
• Supports Live Insertion
• Latch
• Cold spare funcion