74HCT109PW,118 Overview

The package is in the form of 16-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Differential. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type JK Type. In terms of FPGAs, it belongs to the 74HCT series. Its output frequency should not exceed 55MHz. There have been 16 terminations. JK flip flop belongs to 74HCT109 family. It is powered from a supply voltage of 5V. A JK flip flop with a 3.5pFfarad input capacitance is used here. Devices in the HCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. This board has 16 pins. This device exhibits a clock edge trigger type of Positive Edge. To achieve this superior flexibility, 2 circuits are used. High efficiency requires the supply voltage to be maintained at 5V. As a result, it consumes 4μA of quiescent current without being affected by external factors.

74HCT109PW,118 Features

Tape & Reel (TR) package
74HCT series
16 pins

74HCT109PW,118 Applications

There are a lot of Nexperia USA Inc. 74HCT109PW,118 Flip Flops applications.

• Common Clocks
• ESD protection
• Registers
• Instrumentation
• Set-reset capability
• Asynchronous counter
• Automotive
• Bounce elimination switch
• Guaranteed simultaneous switching noise level
• EMI reduction circuitry