74HCT2G66DC-Q100H Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. As part of its design, the 8 series is equipped with this electronic component. SPST - NO switching circuits are used in these analog switch ics. The multiplexer consists of 2 circuits. Use 74HCT2G66 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 95Ohm. To find out what the 8 pins do, please refer to the datasheets. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 4.5V. The analogue multiplexer could operate on 40μA current. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. Put voltage above 20μA on the multiplexer to cause damage. Operating voltages of 5V are compatible with the electrical part. The Automotive, AEC-Q100 series contains it.

74HCT2G66DC-Q100H Features

Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 200MHz

74HCT2G66DC-Q100H Applications

There are a lot of Nexperia USA Inc. 74HCT2G66DC-Q100H Analog Switches & Multiplexers ICs applications.

• SONET
• Transmit
• Digital cross connects (DSX-1)
• Routers
• Ultrasound
• Multi-Line E1 Interface Cards
• Digital access cross connects
• Voice over IP/DSL – Integrated Access Devices, Smart
• PDH Multiplexers
• Optical Applications