Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. Into the electrical component body are injected 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. 74HCT4052 can be used to search for analog multiplexer variants. A 210Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 4.5V. The switch device would be able to operate with 320μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The electrical part can be operated at 5V voltage levels. The electrical component supports 8 inputs. There are 180MHz bandwidths for data transfer. The Drain to Source resistance of this electronic component is 270Ohm.