Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Based on SPDT switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 3. Look for analog switch ic variants by searching with 74HCT4053. A 140Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 4.5V. For this multiplexer to operate, 16μA current would be sufficient. Despite this switch's dual supply capability, its voltage should not exceed 5V. If you are using a dual power supply, you should attach at least 1V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating voltages range from 5V. The electrical component supports 6 inputs. Drain to Source resistance is 180Ohm. This is one of the Automotive, AEC-Q100 series.