74LVC574ADB,112 Overview

The flip flop is packaged in a case of 20-SSOP (0.209, 5.30mm Width). D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A voltage of 1.65V~3.6Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. You should not exceed 200MHzin the output frequency of the device. The element count is 1 . As a result, it consumes 10μA quiescent current. A total of 20 terminations have been made. You can search similar parts based on 74LVC574. The power supply voltage is 2.7V. This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. There is an electronic component mounted in the way of Surface Mount. This board is designed with 20pins on it. This device's clock edge trigger type is Positive Edge. It is designed with 8bits. It reaches 3.6Vwhen the maximum supply voltage (Vsup) is applied. The flip flop has 2ports embedded within it. A total of 8input lines have been provided. There is 100nA quiescent current consumption by it. It is also characterized by BROADSIDE VERSION OF 374.

74LVC574ADB,112 Features

Tube package
74LVC series
20 pins
8 Bits

74LVC574ADB,112 Applications

There are a lot of Nexperia USA Inc. 74LVC574ADB,112 Flip Flops applications.

• Instrumentation
• 2 – Bit synchronous counter
• ESD protection
• Buffer registers
• Circuit Design
• Cold spare funcion
• Pattern generators
• Guaranteed simultaneous switching noise level
• ESD performance
• Frequency Dividers