N74F109D,602 Overview

The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. JK Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74Fseries FPGA. A frequency of 125MHzshould not be exceeded by its output. A total of 2 elements are present. T flip flop consumes 17mA quiescent energy. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74F109, you will find similar parts. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as F/FAST. This part is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. An electrical current of 5V volts is applied to it.

N74F109D,602 Features

Tube package
74F series
5V power supplies

N74F109D,602 Applications

There are a lot of NXP USA Inc. N74F109D,602 Flip Flops applications.

• Computers
• Consumer
• Common Clocks
• Frequency Dividers
• Bus hold
• Dynamic threshold performance
• Synchronous counter
• Power down protection
• Digital electronics systems
• Reduced system switching noise