N74F821D,623 Overview

24-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74F series. It should not exceed 180MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 105mA quiescent current. A total of 24terminations have been recorded. You can search similar parts based on 74F821. Power is provided by a 5V supply. In this case, the D flip flop belongs to the F/FASTfamily. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A power supply of 5Vis required to operate it. There are 2 ports embedded in the flip flops. As an additional reference, you may refer to electronic flip flop POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION.

N74F821D,623 Features

Tape & Reel (TR) package
74F series
5V power supplies

N74F821D,623 Applications

There are a lot of NXP USA Inc. N74F821D,623 Flip Flops applications.

• Convert a momentary switch to a toggle switch
• 2 – Bit synchronous counter
• Frequency Divider circuits
• Shift Registers
• Divide a clock signal by 2 or 4
• Reduced system switching noise
• Data transfer
• Test & Measurement
• Buffered Clock
• Bus hold