CD74HC175MT Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. This output is configured with Differential. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. In the operating environment, the temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 35MHz. D latch consists of 1 elements. There is a consumption of 8μAof quiescent energy. A total of 16terminations have been recorded. The 74HC175 family contains it. It is powered by a voltage of 4.5V . The input capacitance of this JK flip flopis 10pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic part mounted in the way of Surface Mount. This board is designed with 16pins on it. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. 4bits are used in its design. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Due to its superior flexibility, it uses 4 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 2/6V volts. As a result of its output current of 5.2mA, it is very flexible in terms of design.

CD74HC175MT Features

Tape & Reel (TR) package
74HC series
16 pins
4 Bits
2/6V power supplies

CD74HC175MT Applications

There are a lot of Texas Instruments CD74HC175MT Flip Flops applications.

• Memory
• Data storage
• Differential Individual
• Digital electronics systems
• Storage registers
• Frequency Divider circuits
• Computing
• Clock pulse
• Registers
• Convert a momentary switch to a toggle switch