45ns, 20ns SPDT 750mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L4684 10 Pins 10nA 1.65V 10-VFDFN Exposed Pad
SOT-23
NX3L4684TK,132 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
10-VFDFN Exposed Pad
Surface Mount
YES
Operating Temperature
-40°C~125°C TA
Packaging
Tape & Reel (TR)
Published
2010
JESD-609 Code
e4
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
10
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
1.65V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
NX3L4684
Output
SEPARATE OUTPUT
Pin Count
10
JESD-30 Code
S-PDSO-N10
Qualification Status
Not Qualified
Supply Voltage-Max (Vsup)
4.3V
Power Supplies
1.5/3.3V
Number of Channels
1
Number of Circuits
2
-3db Bandwidth
20MHz
On-State Resistance (Max)
750mOhm
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
10nA
Channel Capacitance (CS(off), CD(off))
35pF
On-state Resistance Match-Nom
0.15Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
45ns, 20ns
Charge Injection
50pC
Channel-to-Channel Matching (ΔRon)
40m Ω
Crosstalk
-90dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
130ns
Switch-off Time-Max
90ns
Voltage - Supply, Single (V+)
1.4V~4.3V
Height Seated (Max)
1mm
Length
3mm
RoHS Status
ROHS3 Compliant
NX3L4684TK,132 Product Details
NX3L4684TK,132 Overview
Shipping overseas is convenient with the electronic component packed in 10-VFDFN Exposed Pad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~125°C TA degrees Celsius. 10 terminations have been made so far. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 1.65V volts, the electrical part can be powered up and run. As part of the design of the 10 series, this electronic part has been incorporated into the system. SPDT switching circuits are used in these analog switch ics. Circuits number 2 make up this analogue multiplexer. Try searching with NX3L4684 to find analog multiplexer variants. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.