74AC273MTCX Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Non-Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~6Vvolts. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. It should not exceed 175MHzin its output frequency. In total, it contains 1 elements. It consumes 40μA of quiescent current without being affected by external factors. The 74AC273family includes it. The input capacitance of this JK flip flopis 4.5pF farads. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. There are 8bits in its design. To achieve this superior flexibility, 8 circuits are used. It has 8 output lines to operate. 3input lines are available for you to choose from. -24mAis the output current at high level. There is 24mA output current at the low level. There should be a temperature below 85°Cduring operation. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is 2V. It is capable of supporting a maximum supply voltage of 6V. It is possible to obtain a frequency of 175MHz.

74AC273MTCX Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

74AC273MTCX Applications

There are a lot of ON Semiconductor 74AC273MTCX Flip Flops applications.

• Supports Live Insertion
• CMOS Process
• Shift registers
• Convert a momentary switch to a toggle switch
• Memory
• Digital electronics systems
• ESCC
• High Performance Logic for test systems
• Asynchronous counter
• Load Control