74AC373PC Overview

It is embedded in the 20-DIP (0.300, 7.62mm) package. Packaged in the way of Tube. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Based on the way of Through Hole, this electronic part is mounted. The supply voltage of the device is 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. In the 74AC series, this FPGA is located. The electronic part in this image has 8 bits. There is no doubt that it belongs to the family 74AC373. 20 pins are used in its design. Through Hole is the method used for mounting this electronic part. Electronic circuits comprise 2 input lines. The output current of 24mA makes it feature maximum design flexibility. There are 8 output lines that correspond to the binary equivalents of the input line. 1 elements are present in it. The circuit's superior flexibility is achieved through the use of 8 circuits. 24mA is the low level output current. It is set to zero for the high level output current. The operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It is capable of providing a maximum supply voltage of 6V. It operates with the minimal supply voltage of 2V.

74AC373PC Features

20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements

74AC373PC Applications

There are a lot of ON Semiconductor 74AC373PC Latches applications.

• Up-Down Johnson
• Lamp and Display (LED)
• Hammer Device Information
• Automotive ADAS
• Accumulator Registers
• Parallel Input
• Buffer Storage
• Clocks
• Automotive Infotainment
• Network Switches