74AC373SCX Overview

In the package 20-SOIC (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 2V~6V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. In the 74AC series, this FPGA is located. An electronic part with 8 bits is designed. It is a member of the 74AC373 family. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Input lines are converted into binary equivalents by 8 output lines. This element consists of 1. 8 circuits are used to achieve superior flexibility. The low level output current is set to 24mA. The high level output current is set to -24mA. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. The supply voltage is limited to 6V. With a minimum supply voltage of 2V, it operates.

74AC373SCX Features

20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements

74AC373SCX Applications

There are a lot of ON Semiconductor 74AC373SCX Latches applications.

• Parallel data storage
• Shift register
• Storage
• Buffer register
• Parallel-to-Serial Data Conversion
• Decade counting 7-segment decimal display
• Parallel data storage
• Communication systems
• Accumulator Registers
• Counter