74ACT373MSAX Overview

20-SSOP (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. There is -40°C~85°C operating temperature. In the 74ACT series, this FPGA is located. The design of this electronic part is based on 8 bits. The family in which it belongs to is 74ACT373. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Optimal efficiency requires 5V as the supply voltage. Input lines are generated as binary equivalents by 3 output lines. This element consists of 1. In order to achieve its superior flexibility, 8 circuits are used. In the low level output current, the value is set to 24mA. -24mA is the high level output current. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. There is a maximum voltage of 5.5V supported. The minimal voltage for operation is 4.5V.

74ACT373MSAX Features

20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements

74ACT373MSAX Applications

There are a lot of ON Semiconductor 74ACT373MSAX Latches applications.

• Pattern Generators
• General-Purpose Register
• Parallel Input
• Counters
• Display
• Shift register
• Counter
• Parallel data storage
• Stacked or Push-Down Registers
• Buffer register