74ACTQ16374SSCX Overview

The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74ACTQ series. You should not exceed 71MHzin its output frequency. A total of 2elements are contained within it. It consumes 80μA of quiescent Members of the 74ACTQ16374family make up this object. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. There is an electronic part that is mounted in the way of Surface Mount. There are 48pins on it. In this device, the clock edge trigger type is Positive Edge. Flip flops designed with 16bits are used in this part. 16 circuits are used to achieve its superior flexibility. For high efficiency, the supply voltage should be kept at 5V. There are 3 output lines in this JK flip flop. As of now, there are 8input lines. High level output current is set to -24mA. It is set to 24mAfor the low level output current. Ideally, the operating temperature should be lower than 85°C. If the operating temperature is higher than -40°C, the system should operate properly. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. There is a maximum supply voltage of 5.5V. It is possible to achieve 71MHz frequencies.

74ACTQ16374SSCX Features

Tape & Reel (TR) package
74ACTQ series
48 pins
16 Bits

74ACTQ16374SSCX Applications

There are a lot of ON Semiconductor 74ACTQ16374SSCX Flip Flops applications.

• 2 – Bit synchronous counter
• Pattern generators
• Balanced Propagation Delays
• ESCC
• Shift Registers
• Frequency division
• High Performance Logic for test systems
• Cold spare funcion
• Shift registers
• Instrumentation