DM74ALS576AWMX Overview

In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. It is configured with Tri-State, Invertedas an output. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at 0°C~70°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. The 74ALSseries comprises this type of FPGA. You should not exceed 30MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 18mA of quiescent current without being affected by external factors. Members of the 74ALS576family make up this object. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. It is designed with 8bits. 8 circuits are used to achieve its superior flexibility. Optimal efficiency requires a supply voltage of 5V. There are 3 output lines in this JK flip flop. As of now, there are 8input lines. A -2.6mAis set for the high level output current. 24mA is the low level output current. A temperature below 70°Cis recommended for operation. It is recommended that the operating temperature is higher than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. There is a maximum voltage support of 5.5V. We are able to achieve a frequency of 30MHz.

DM74ALS576AWMX Features

Tape & Reel (TR) package
74ALS series
20 pins
8 Bits

DM74ALS576AWMX Applications

There are a lot of ON Semiconductor DM74ALS576AWMX Flip Flops applications.

• Cold spare funcion
• Registers
• Modulo – n – counter
• Single Up Count-Control Line
• Storage registers
• ATE
• ESCC
• Common Clocks
• Control circuits
• Differential Individual