74ACTQ573SCX Overview

The 20-SOIC (0.295, 7.50mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74ACTQ series. It is designed with 8 bits. 74ACTQ573 is the family name of it. There are 20 pins on it. It is mounted according to the Surface Mount method. There are electronic circuits attached to the 8 input lines. The supply voltage should be maintained at 5V for high efficiency. Input lines are converted into binary equivalents by 3 output lines. In total, it has 1 elements. 8 circuits enable it to achieve high performance. 24mA is set as the low level output current. -24mA represents the high level output current. The operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. There is a maximum supply voltage of 5.5V supported by this device. A voltage of 4.5V is the minimum supply voltage required for it to operate.

74ACTQ573SCX Features

20-SOIC (0.295, 7.50mm Width) package
74ACTQ series
8 Bits
74ACTQ573 family
20 pins
1 elements

74ACTQ573SCX Applications

There are a lot of ON Semiconductor 74ACTQ573SCX Latches applications.

• Timers
• Frequency
• A/D converters
• Up-Down Johnson
• OC-48 communication systems
• Automotive Body Electronics
• Display
• Parallel data storage
• Watches
• Decade counting 7-segment decimal display