74ALVCH16374DTR Overview

The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2.3V~3.6V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. JK flip flop belongs to the 74ALVCHseries of FPGAs. You should not exceed 250MHzin the output frequency of the device. A total of 2elements are present in it. It consumes 40μA of quiescent There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ALVCH16374 family contains this object. A voltage of 3.3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 6pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. ALVC/VCX/Ais the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 3.6V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It runs on 3.3Vvolts of power. The D flip flop is embedded with 2ports.

74ALVCH16374DTR Features

Tape & Reel (TR) package
74ALVCH series
3.3V power supplies

74ALVCH16374DTR Applications

There are a lot of ON Semiconductor 74ALVCH16374DTR Flip Flops applications.

• ESCC
• Consumer
• Load Control
• Asynchronous counter
• Balanced 24 mA output drivers
• Frequency Dividers
• ESD performance
• Buffer registers
• Synchronous counter
• Digital electronics systems