MC74HCT574AN Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Through Holeis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -55°C~125°C TAis used in the operation. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74HCT series. This D flip flop should not have a frequency greater than 30MHz. A total of 1 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. If you search by 74HCT574, you will find similar parts. A voltage of 5V provides power to the D latch. Its input capacitance is 10pFfarads. It is a member of the HCTfamily of D flip flop. Through Hole mounts this electronic component. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with a number of bits of 8. To achieve this superior flexibility, 8 circuits are used. In order for the device to operate, it requires 5V power supplies. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines.

MC74HCT574AN Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT574AN Applications

There are a lot of ON Semiconductor MC74HCT574AN Flip Flops applications.

• Automotive
• Communications
• CMOS Process
• Cold spare funcion
• Memory
• ESD performance
• Pattern generators
• Data transfer
• Guaranteed simultaneous switching noise level
• Count Modes