74F574SJ Overview

The package is in the form of 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tube. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at a temperature of 0°C~70°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74Fseries of FPGAs. A frequency of 100MHzshould be the maximum output frequency. There are 1 elements in it. Despite external influences, it consumes 86mAof quiescent current. The 74F574 family contains this object. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. Flip flops designed with 8bits are used in this part. To achieve this superior flexibility, 8 circuits are used. For high efficiency, the supply voltage should be kept at 5V. There are no output lines on the JK flip flop. It has 1lines. High level output current is set to -3mA. Low level output current is set to 24mA. The operating temperature should be lower than 70°C. A temperature above 0°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. A maximum voltage of 5.5V can be provided by it. It is possible to obtain a frequency of 100MHz.

74F574SJ Features

Tube package
74F series
20 pins
8 Bits

74F574SJ Applications

There are a lot of ON Semiconductor 74F574SJ Flip Flops applications.

• Latch
• CMOS Process
• Shift Registers
• Event Detectors
• ESD protection
• Storage Registers
• Buffer registers
• Data storage
• Reduced system switching noise
• Frequency Divider circuits