74LCX16374MTD Overview

48-TFSOP (0.240, 6.10mm Width)is the packaging method. The Tubepackage contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~3.6V volts. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74LCXseries of FPGAs. It should not exceed 170MHzin terms of its output frequency. A total of 2elements are present in it. The 74LCX16374family includes it. A JK flip flop with a 7pFfarad input capacitance is used here. It is mounted by the way of Surface Mount. A total of 48pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. Its flexibility is enhanced by 16 circuits. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 output lines in this JK flip flop. It consumes 20μA current.

74LCX16374MTD Features

Tube package
74LCX series
48 pins

74LCX16374MTD Applications

There are a lot of ON Semiconductor 74LCX16374MTD Flip Flops applications.

• Event Detectors
• Convert a momentary switch to a toggle switch
• Memory
• Bounce elimination switch
• Dynamic threshold performance
• Power down protection
• Modulo – n – counter
• High Performance Logic for test systems
• Memory
• Storage Registers