74LVC574ADTR2G Overview

The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 1.65V~3.6V. The operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74LVC series. It should not exceed 200MHzin its output frequency. A total of 1elements are present in it. Currently, there are 20 terminations. A voltage of 3.3V is used to power it. A JK flip flop with a 5pFfarad input capacitance is used here. It is a member of the LVC/LCX/Zfamily of D flip flop. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. Vsup reaches 3.6V, the maximal supply voltage. The D flip flop has no ports embedded. It consumes 10μA of quiescent current without being affected by external factors.

74LVC574ADTR2G Features

Tape & Reel (TR) package
74LVC series
20 pins

74LVC574ADTR2G Applications

There are a lot of ON Semiconductor 74LVC574ADTR2G Flip Flops applications.

• CMOS Process
• Registers
• Dynamic threshold performance
• Synchronous counter
• Asynchronous counter
• Power down protection
• ESD protection
• Consumer
• Latch-up performance
• Cold spare funcion