74LVT16374MTDX Overview

It is packaged in the way of TFSOP. Package Tape & Reel (TR)embeds it. There are 48 terminations,The D flip flop is powered by a voltage of 3.3V . A device of this type belongs to the family of LVT. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 16bits are used in this part. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. This input has 2lines in it. The high level output current is set to -32mA. It is set to 64mAfor the low level output current. There should be a temperature below 85°Cduring operation. It is recommended that the operating temperature is higher than -40°C. It is powered by 2.7V as its minimum supply voltage. There is a maximum voltage support of 3.6V. The frequency that can be achieved is 160MHz. It uses BUS DRIVERas its logic IC. It has 2 functions.

74LVT16374MTDX Features

Tape & Reel (TR) package
48 pins
16 Bits
2 Functions

74LVT16374MTDX Applications

There are a lot of ON Semiconductor 74LVT16374MTDX Flip Flops applications.

• Memory
• Data transfer
• Computing
• Load Control
• Frequency Dividers
• Functionally equivalent to the MC10/100EL29
• 2 – Bit synchronous counter
• Computers
• Registers
• Matched Rise and Fall