SN74HC374DWR Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. You can find it in the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 70MHzin the output frequency of the device. The element count is 1 . There have been 20 terminations. Members of the 74HC374family make up this object. It is powered from a supply voltage of 5V. Its input capacitance is 3pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. Vsup reaches 6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 2V. Its flexibility is enhanced by 8 circuits. In light of its reliable performance, this T flip flop is well suited for TR. An electrical current of 2/6V volts is applied to it. The flip flop has 2embedded ports. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 7.8mA. Currently, there are 3 input lines present. As a result, it consumes 8μA of quiescent current without being affected by external factors.

SN74HC374DWR Features

Cut Tape (CT) package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC374DWR Applications

There are a lot of Texas Instruments SN74HC374DWR Flip Flops applications.

• ESD performance
• Functionally equivalent to the MC10/100EL29
• Parallel data storage
• Safety Clamp
• Data Synchronizers
• Pattern generators
• Shift Registers
• Frequency Dividers
• Event Detectors
• Single Down Count-Control Line