74LVT574MTCX Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2.7V~3.6Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74LVT series. This D flip flop should not have a frequency greater than 150MHz. In total, there are 1 elements. It consumes 190μA of quiescent It has been determined that there have been 20 terminations. The 74LVT574family includes it. A voltage of 3.3V is used to power it. Its input capacitance is 4pFfarads. In terms of electronic devices, this device belongs to the LVTfamily of devices. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 8. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D flip flop has no ports embedded. High efficiency requires the supply voltage to be maintained at 3.3V. There are 3 output lines in this JK flip flop.

74LVT574MTCX Features

Tape & Reel (TR) package
74LVT series
20 pins
8 Bits

74LVT574MTCX Applications

There are a lot of ON Semiconductor 74LVT574MTCX Flip Flops applications.

• Clock pulse
• Control circuits
• Differential Individual
• Communications
• CMOS Process
• Frequency Divider circuits
• Reduced system switching noise
• Digital electronics systems
• Data Synchronizers
• Storage Registers