74LVX74MTCX Overview

In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. The Tape & Reel (TR)package contains it. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~3.6V. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The 74LVXseries comprises this type of FPGA. Its output frequency should not exceed 85MHz. Currently, there are 14 terminations. The 74LVX74 family contains it. A voltage of 2.7V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. LV/LV-A/LVX/His the family of this D flip flop. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 3.6V. Normally, the supply voltage (Vsup) should be above 2V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of 3.3V power supplies are needed to run it. In addition to its maximum design flexibility, the output current of the T flip flop is 4mA. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. 2μAquiescent current consumed. It is reported that there are 2 channels.

74LVX74MTCX Features

Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies

74LVX74MTCX Applications

There are a lot of ON Semiconductor 74LVX74MTCX Flip Flops applications.

• Patented noise
• Bounce elimination switch
• ATE
• Single Up Count-Control Line
• Pattern generators
• Parallel data storage
• CMOS Process
• ESD protection
• Storage Registers
• Reduced system switching noise