MC74LCX74DTR2G Overview

The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). As configured, the output uses Differential. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 2V~3.6Vvolts. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74LCXseries contain this type of chip. You should not exceed 150MHzin its output frequency. The number of terminations is 14. This D latch belongs to the family of 74LCX74. A voltage of 2.5V is used to power it. Its input capacitance is 7pFfarads. It belongs to the family of electronic devices known as LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. This board is designed with 14pins on it. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 3.6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. In order for the device to operate, it requires 3.3V power supplies. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. It operates with 1 output lines. In terms of quiescent current, it consumes 10μA . A total of 2 channels are available.

MC74LCX74DTR2G Features

Tape & Reel (TR) package
74LCX series
14 pins
3.3V power supplies

MC74LCX74DTR2G Applications

There are a lot of ON Semiconductor MC74LCX74DTR2G Flip Flops applications.

• Storage Registers
• Frequency Dividers
• Consumer
• Instrumentation
• Matched Rise and Fall
• Memory
• Functionally equivalent to the MC10/100EL29
• Convert a momentary switch to a toggle switch
• Differential Individual
• Computers