74VHC175MTC Overview

The flip flop is packaged in a case of 16-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tubepackage. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. A frequency of 115MHzshould not be exceeded by its output. A total of 1 elements are present. It has been determined that there have been 16 terminations. If you search by 74VHC175, you will find similar parts. A voltage of 3.3V provides power to the D latch. The input capacitance of this JK flip flopis 4pF farads. It is a member of the AHC/VHCfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. An electronic part designed with 4bits is used in this application. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. Considering the reliability of this T flip flop, it is well suited for RAIL. The D latch operates on 2/5.5V volts. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 4 channels are available.

74VHC175MTC Features

Tube package
74VHC series
16 pins
4 Bits
2/5.5V power supplies

74VHC175MTC Applications

There are a lot of ON Semiconductor 74VHC175MTC Flip Flops applications.

• Memory
• Reduced system switching noise
• ESD protection
• Buffer registers
• Matched Rise and Fall
• Consumer
• QML qualified product
• Storage Registers
• Storage registers
• Instrumentation