74VHC574M Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74VHC series. A frequency of 115MHzshould not be exceeded by its output. A total of 1 elements are present. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74VHC574 family. Power is provided by a 3.3V supply. Input capacitance of this device is 4pF farads. Devices in the AHC/VHCfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. 5.5Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with RAIL. The flip flop has 2ports embedded within it. Featuring the maximum design flexibility, it has an output current of 8mA . Currently, there are 2 input lines present. There is a consumption of 4μAof quiescent current from it. A total of 8 channels are available.

74VHC574M Features

Tube package
74VHC series
20 pins
8 Bits

74VHC574M Applications

There are a lot of ON Semiconductor 74VHC574M Flip Flops applications.

• Digital electronics systems
• Data Synchronizers
• Parallel data storage
• Single Down Count-Control Line
• ATE
• Bus hold
• Power down protection
• ESD protection
• Communications
• 2 – Bit synchronous counter