SN74ABT574AN Overview

The package is in the form of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ABTseries contain this type of chip. Its output frequency should not exceed 200MHz Hz. In total, there are 1 elements. Despite external influences, it consumes 250μAof quiescent current. The number of terminations is 20. D latch belongs to the 74ABT574 family. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 3.5pF farads. Electronic devices of this type belong to the ABTfamily. In this case, the electronic component is mounted in the way of Through Hole. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in Bus Driver/Transceiver. An electronic part designed with 8bits is used in this application. Its flexibility is enhanced by 8 circuits. It operates from 5V power supplies. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. There are 3 output lines on it. In terms of quiescent current, it consumes 30mA .

SN74ABT574AN Features

Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT574AN Applications

There are a lot of Texas Instruments SN74ABT574AN Flip Flops applications.

• Convert a momentary switch to a toggle switch
• EMI reduction circuitry
• Individual Asynchronous Resets
• Memory
• Event Detectors
• Buffered Clock
• Divide a clock signal by 2 or 4
• Frequency division
• Balanced Propagation Delays
• Control circuits