CAT1024WI-25-GT3 Overview

It is mounted through 8 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 3V. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. In total, IC powers are 8 pins on the board. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of -2V for this PMIC. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 3mA volt supply current. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use CAT1024, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 3mA can be used.

CAT1024WI-25-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of -2V
3mA operating supply current

CAT1024WI-25-GT3 Applications

There are a lot of ON Semiconductor CAT1024WI-25-GT3 Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Detection of phase sequence
• Stable power system
• Leakage protection
• Embedded computing
• Utility meter
• Display equipment
• External alarm
• Microprocessor system
• Refrigeration