CAT1163WI-42-T3 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Power management has a total of 8 pins. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 3mA for the power management. The maximum supply temperature is 3mA.
CAT1163WI-42-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1163WI-42-T3 Applications
There are a lot of ON Semiconductor CAT1163WI-42-T3 Voltage Supervisors applications.
- DVR
- Smartphones
- Battery-powered equipment
- emergency room
- Computer applications
- Transformer load monitoring equipment
- Detection of phase imbalance
- Unattended substation automation
- Detection of phase loss
- Dash board
