CAT1640YI-25-GT3 Overview

A total of 8 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-TSSOP (0.173, 4.40mm Width) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. There should be a minimum voltage supply (Vsup) of 3V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 3mA volt supply current. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using CAT1640, the base power ics number. The maximum supply temperature that PMIC chip can work with is 3mA.

CAT1640YI-25-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current

CAT1640YI-25-GT3 Applications

There are a lot of ON Semiconductor CAT1640YI-25-GT3 Voltage Supervisors applications.

• Cloud computing
• Insulation fault location system
• DSP
• Personal computers
• Rechargeable batteries
• Detection of phase sequence
• Smart meter
• Transformer load monitoring equipment
• Battery-powered equipment
• Military communications