CAT809TTBI-GT3 Overview

There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 3.3V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 3 pins on power management. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 15μA. You can always use CAT809, the base supervisor number, to search for similar PMICs of the manufacturer.

CAT809TTBI-GT3 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
15μA operating supply current

CAT809TTBI-GT3 Applications

There are a lot of ON Semiconductor CAT809TTBI-GT3 Voltage Supervisors applications.

• Personal computers
• Battery cars
• Power distribution systems of CCU
• Military communications
• Electric heating appliances
• Power distribution systems of operating room
• Transformer load monitoring equipment
• Kitchen appliances
• Power distribution systems of infant care room
• Set top box