Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -55°C~125°C TA. A high-quality output is provided by the electrical component's 3 channels. A SPDT switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 3. Using the 4053 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 1.05kOhm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 15V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. There is no problem with using dual supply voltage, but it should not exceed 7.5V. With dual power supplies, you should attach at least 2.5V. The 6 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 40MHz bandwidths. An environment with a temperature greater than 125°C should not be used to operate the digital switches. In this digital multiplexer, there are 3 outputs. There is a 16-SOIC package available from suppliers.